03-05-2007 03:50 AM - edited 03-05-2019 02:42 PM
hi,
accidently used erase NVRAM , and detled IOS , after rebooting switch it just shows as
switch:
it is not gong to config mode also , only very few command were shwos when i press ? ,but its veriosn shows
C2960 Boot Loadr (C2960-HBOOT-M) Version 12.2 (25r)SEE1, RELEASE SOFTEWARE (Fc1)
,anybody please help me to bring my switch in working condition . , i try to download cisco ios from site but it asking password , and how i can solve this as soon as possible ,
regards ,
bbn
03-05-2007 03:52 AM
Hi,
You require a CCO login for the software downloads from Cisco.com. If you dont have one, you will have to contact your Service Provider. Only when u gets the IOS, we can plan for the IOS load.
Jith
03-05-2007 04:21 AM
Hi bbn,
You have to do a xmodem recovery.
http://www.cisco.com/en/US/products/ps6406/products_configuration_guide_chapter09186a00805a7628.html
-amit singh
03-05-2007 08:57 PM
Hi bbn,
You have to have a CCO login to download the image from Cisco.com. Do you have any Service Level agreement with Cisco? You can get the SLA done with cisco and can contact TAC for direct assistance for the problems as mentioned above.
-amit singh
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide