03-05-2007 05:38 AM - edited 03-14-2019 08:19 PM
Hello, if I have a backup category all of a Cisco Unity express module, can I restore this on another module with a higher software version ? Or do I need first to install the same software as the backup version and do the restore procedure afterwards ?
Many Thanks
Dirk
Solved! Go to Solution.
03-05-2007 06:29 AM
Dirk,
You can restore to a higher version as this is the process used when upgrading CUE. You backup the current configuration, upgrade the software and restore the data.
Also, keep in mind that the license file is not part of the backup, so you will need to install the license file on the new module before restoring the data.
Hope this helps. If so, please rate the post.
Brandon
03-05-2007 06:29 AM
Dirk,
You can restore to a higher version as this is the process used when upgrading CUE. You backup the current configuration, upgrade the software and restore the data.
Also, keep in mind that the license file is not part of the backup, so you will need to install the license file on the new module before restoring the data.
Hope this helps. If so, please rate the post.
Brandon
03-05-2007 06:37 AM
Brandon,
could you let me know how to back up the CUE?
regards,
Anil
03-05-2007 06:39 AM
Anil,
Take a look at the following link.
Hope this helps.
Brandon
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide