cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
305
Views
0
Helpful
2
Replies

Inter-Cluster Trunk CCM PBX: local echo when MTP required is checked

guilhem.perez
Level 4
Level 4

Hi,

I set an Inter-Cluster Trunk between my CCM and a PBX.

If MTP required is not checked, I haven't audio problem but I can't hold, transfer...

If MTP required is checked, I have audio problem (a "local" echo on H323 phone registered to pbx) and no problem with hold, transfer...

Does somebody know how to solve my issue?

Best regards.

Thanks

2 Replies 2

wbreitzke
Level 1
Level 1

It look like problem related with Gateway , upgraded the gateway to 12.4.6T. MTP is being used on callmanager to provide

supplementary service.

dgahm
Level 8
Level 8

Echo results from the audio signal being reflected back to the talker with delay. In your case that reflection is coming from the MTP, so you need to focus there. What flavor of MTP are you using? Is it software or hardware? Can you try a different MTP resource? If hardware DSP farm are there errors?

Please rate helpful posts.

Dave

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: