fwsm, pdm and context config

Unanswered Question
Mar 5th, 2007
User Badges:

I am in the process restoring a previous multiple context fwsm to another, separate fwsm.


I copied all the contexts to a tftp server and restored one context to the new fwsm per the copy tftp:// command.


Everthing looks great from the CLI in that I can ping outbound, I can see the rule set and config settings (sh run), etc. From the context, the config looks like the old fwsm on the new fwsm.


The problem is I cannot see ANYTHING when I log into the PDM. Nothing in the Access Rules tab nor the Hosts/Network tab. The "view unknown hosts/network groups" button is disabled.


I believe I done everything from the documentation but nothing shows up in the PDM.


I am running:

FWSM Firewall Version 2.3(4) <context>

FWSM Device Manager Version 4.1(4)


Any ideas on how to get the configuration to show up in PDM?

thanks.

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
IWAN HOOGENDOORN Mon, 03/05/2007 - 21:48
User Badges:
  • Bronze, 100 points or more

Hi,


Have you turned on logging?


Do a #show logging


If you find this post usefull

please don't forget to rate this


#########################################

#Iwan Hoogendoorn

#########################################

Actions

This Discussion