03-05-2007 09:32 PM - edited 03-03-2019 04:02 PM
Hi peoples,
Can someone verify if I can give a trunk handoff to a 871 ?
Can the 871 deal with creating dot1q sub interfaces on fa4 ?
This is on a Advanced IP services IOS.
Yes I know it is possible to create VLANs and then use an LAN port but I wish to use 3 VLANs externally/internally.
Cheers.
03-05-2007 09:38 PM
Hi,
Yes this is possible.
You need a proper IOS image.
If you find this post usefull
please don't forget to rate this
#########################################
#Iwan Hoogendoorn
03-05-2007 09:46 PM
Hi
In addition to the other post you need to have Advanced IP Services IOS image in your box to have VLANs configured in your box.
do refer the below link for more info on the same..
http://www.cisco.com/en/US/products/hw/routers/ps380/products_data_sheet0900aecd8028a976.html
regds
03-06-2007 01:42 PM
Hi guys,
Thanks to Iwan & spremkumar for the answers.
Was able to live test & confirm it was all possible.
Thanks.
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community:
