CSM-S in bridge mode with more than one vlan.

Unanswered Question
IWAN HOOGENDOORN Tue, 03/06/2007 - 03:18
User Badges:
  • Bronze, 100 points or more

Hi,


Yes it can


Please look @ this documents:

http://www.cisco.com/en/US/products/hw/modules/ps2706/products_configuration_example09186a00800946e0.shtml


http://www.cisco.com/en/US/products/hw/modules/ps2706/products_configuration_example09186a00802c1201.shtml


If you find this post usefull

please don't forget to rate this


#########################################

#Iwan Hoogendoorn

#########################################

Hello Iwan and thanks for your help.

I must be clear, I'm looking for a security issue.

I want to use a CSM (bridge mode) with two vlans client (A & B) and two vlans server (C & D), like this:


vlan A client

ip 10.0.0.1 255.255.255.0

vlan B server

ip 10.0.0.1 255.255.255.0

vlan C client

ip 10.0.1.1 255.255.255.0

vlan D server

ip 10.0.1.1 255.255.255.0


If I change only the IP address of a host in vlan A (using a vlan C address), can this host contact a host in vlan C or D?

Regards.

Andrea.


Actions

This Discussion