03-06-2007 02:39 AM - edited 03-11-2019 02:42 AM
I have a PIX 525 FO with UR license.Its running 6.3(5) code. in show ver it shows VPN-3DES-AES as disabled.
how do i enable it.
03-06-2007 03:10 AM
Hi
Do you have a Cisco login. if not you need to register a Cisco account. Go to this page and register
https://tools.cisco.com/SWIFT/Licensing/RegistrationServlet
Once you have a login go to
You will be prompted for you username/password.
Once on this page in the box at the top labelled "Licenses not requiring a PAK" click on the "here for available licenses" link.
Then scroll down to select the 3DES pix firewall license and follow the instructions. You will then be e-mailed with your 3DES update key.
HTH
03-06-2007 07:45 AM
hi,
you can get 3des license free.However,for AES,you'll have to purchase an additional license.
you can get the 3des by following the instructions in the above message.
the new activation key which is mailed to you can be entered by this command :
activation-key < four tuple key >
Hope this helps!!
Sushil
TAC Engineer
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: