b.speltz Mon, 03/12/2007 - 12:32
User Badges:
  • Bronze, 100 points or more

Use the conduit ( older version PIX) or Outbound/ apply commnad to block the broadcasts.

check what broadcase address and port number server is using , apply conduit or Outbound command on PIX using that IP or Port.


Refer these links:

http://www.cisco.com/en/US/products/sw/secursw/ps2120/products_command_reference_chapter09186a00801727ab.html#wp1044408

http://www.cisco.com/univercd/cc/td/doc/product/iaabu/pix/pix_v53/config/commands.htm#xtocid10



Actions

This Discussion