I am trying to get dial in access to a cisco 2500 router.
I have set up the modem, and last week had it all working. I could dial the modem connected to the router and i would get an EXEC username and password prompt.
I attempted this last night and got nothing. Nothing has been changed on the router.
When I have chat debugging on I can see that the activation chat script is running when the line becomes active, then the connection is dropped and the reset script is run.
Has anyone any idea as to how I can trace the route of this problem.
service timestamps debug datetime localtime
service timestamps log datetime localtime
enable secret 5 $1$EaXM$R/8dhdS80A.LWbpNU/HgI/
enable password 7 11071C11001D190755
username pegasus privilege 15 password 7 020A014D0E0A5E72
username test callback-dialstring 33 password 7 06120A3258
clock timezone AEST 10
no aaa new-model
chat-script startup "" "at&fe1q0&d3&s1&q6s37=9s0=1&w0&z0=33" OK
chat-script activation "" "at"
chat-script reset ""
ip address 10.242.1.15 255.255.252.0
no ip address
description Local Test Serial Link
ip address 10.242.5.2 255.255.255.0
no ip address
ip default-gateway 10.242.5.1
no ip http server
ip route 0.0.0.0 0.0.0.0 10.242.5.1
ip route 10.0.0.0 255.0.0.0 10.242.5.0
line con 0
line aux 0
exec-timeout 0 0
script startup startup
script reset reset
script activation activation
transport input all
line vty 0 4
password 7 09424B1D0E0A05195A
transport input telnet