setting up pix at home

Unanswered Question
Mar 7th, 2007
User Badges:

Hi all, If I want to put my pix on a public ip at home, do I need 3 public ip's? one for the wan interface thats goes to my provider, 1 for the inside interface of my router and 1 for the pix? or could i get away with using 2, by using ip unnumbered on the ethernet interface of my router so it uses the same ip as the wan atm interface ?


cheers

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.

Hi,


You only need 1 Public IP address ... the Inside interface & DMZ'S are private IP ranges ...


The Private will be NATTED when going outside



If you find this post usefull

please don't forget to rate this


#########################################

#Iwan Hoogendoorn

#########################################

carl_townshend Wed, 03/07/2007 - 05:50
User Badges:

If I only use 1 public address, that means i do all my natting on my router, I want this done on my firewall!!

Actions

This Discussion