Solved: DHCP on a WAP

mrashby · ‎03-07-2007

All,

I just got a Cisco Aironet 1242AG. I have it configured but it will be installed in a conference room. So there is a need to have addresses dynamically assigned. Can I configure a DHCP pool on this AP. I found some documentation but it isn't really giving me what I want. Can someone point me in the right direction. Thanks

Rob Huffman · ‎03-07-2007

Hi Mario,

Maybe this can get you started;

Configuring the Access Point to Provide DHCP Service

http://www.cisco.com/en/US/products/hw/wireless/ps4570/products_configuration_guide_chapter09186a0080184a86.html#1057097

Hope this helps!

Rob

View solution in original post

Rob Huffman · ‎03-07-2007

Hi Mario,

Maybe this can get you started;

Configuring the Access Point to Provide DHCP Service

http://www.cisco.com/en/US/products/hw/wireless/ps4570/products_configuration_guide_chapter09186a0080184a86.html#1057097

Hope this helps!

Rob

mrashby · ‎03-07-2007

This works fine but one thing, I named my address pool Atlantis and when I look in the logs it is telling me;

Mar 7 11:33:05.734: DHCPD: pool atlantis has no parent.

Mar 7 11:33:05.734: DHCPD: child pool: 165.115.31.0 / 255.255.255.0 (atlantis)

Do you perhaps know what this means?

mrashby · ‎03-08-2007

Rob,

Nevermind I figured out what the problem was thanks for the help.