03-07-2007 09:02 AM - edited 02-21-2020 01:26 AM
I have a problem with my Pix 506E : I can't connect by telnet session. Is there any option to reactivate it from the PDM ?
Thks
Solved! Go to Solution.
03-07-2007 09:18 AM
Yes, there is a way to enable Telnet access via PDM-
Cofniguration -> System Properties -> Administration -> Telnet
Here you can add the host IPs from where you can telnet and specify the interface where these clients are located.
Note: You cannot telnet to PIX firewall from outside/lowest security level interface.
Regards,
Vibhor.
03-07-2007 09:18 AM
Yes, there is a way to enable Telnet access via PDM-
Cofniguration -> System Properties -> Administration -> Telnet
Here you can add the host IPs from where you can telnet and specify the interface where these clients are located.
Note: You cannot telnet to PIX firewall from outside/lowest security level interface.
Regards,
Vibhor.
03-08-2007 12:07 AM
Thank you for your help, it is working now.
Musa Birkan
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide