03-07-2007 10:52 AM - edited 03-17-2019 08:58 PM
Have call manager express. Need to find a way to ring both an analog phone and voip phone at the same time.
I have setup a dial peer as follows:
dial-peer voice 7399 voip
destination-pattern 7399
modem passthrough nse codec g711ulaw
voice-class h323 1
session target ipv4:192.168.1.1
codec g711ulaw
fax rate disable
Ephone-dn setup like:
ephone-dn 1 dual-line
number 7399
ephone 1
button 1:1
Any ideas how to make these both ring at the same time? Only the ip phone rings.
03-07-2007 12:01 PM
where is the analog phone ? Do you have an FXS port in the router, or ata ?
03-07-2007 12:04 PM
Using an ATA
03-07-2007 12:12 PM
Upgrade ATA to latest SCCP code. Configure as ephone and assign the same DN "button".
If you do not have CCO download access for ATA image, get a maintenance contract or email me.
03-07-2007 12:14 PM
Im pretty sure i have the latest ATA image. But how do i configure it as an ephone?
03-07-2007 12:34 PM
Which image do you have? You need a SCCP image, not H.323.
Then configure just like two ephones, each with mac, type ATA and button.
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: