Cisco 1760 router problem

Unanswered Question

Hi,


Any idea why I can not remove the deleted file in flash: ?


R1#show flash:


System flash directory:

File Length Name/status

1 12124968 c1700-ipvoice-mz.123-5d.bin [deleted]

2 12504136 c1700-ipvoice-mz.123-15a.bin

[24629232 bytes used, 8925196 available, 33554428 total]

32768K bytes of processor board System flash (Read/Write)


R1#squeeze flash: ?

<cr>


R1#squeeze flash:

Squeeze operation may take a while. Continue? [confirm]

First create squeeze log by erasing the entire device


%Error squeezing flash (Missing or corrupted log)

R1#sh ver

Cisco Internetwork Operating System Software

IOS (tm) C1700 Software (C1700-IPVOICE-M), Version 12.3(15a), RELEASE SOFTWARE (fc2)

Technical Support: http://www.cisco.com/techsupport

Copyright (c) 1986-2005 by cisco Systems, Inc.

Compiled Thu 21-Jul-05 23:43 by dchih

Image text-base: 0x8000816C, data-base: 0x81434990


ROM: System Bootstrap, Version 12.2(4r)XL, RELEASE SOFTWARE (fc1)

ROM: C1700 Software (C1700-IPVOICE-M), Version 12.3(15a), RELEASE SOFTWARE (fc2)


R1 uptime is 3 weeks, 1 day, 14 hours, 46 minutes

System returned to ROM by power-on

System restarted at 19:28:37 NZDT Tue Feb 13 2007

System image file is "flash:c1700-ipvoice-mz.123-15a.bin"


cisco 1760 (MPC860P) processor (revision 0x200) with 59097K/6439K bytes of memory.

Processor board ID FOC06370050 (2079331927), with hardware revision BB67

MPC860P processor: part number 5, mask 2

Channelized E1, Version 1.0.

Bridging software.

X.25 software, Version 3.0.0.

Primary Rate ISDN software, Version 1.1.

1 Ethernet/IEEE 802.3 interface(s)

1 FastEthernet/IEEE 802.3 interface(s)

13 Serial network interface(s)

1 Channelized E1/PRI port(s)

32K bytes of non-volatile configuration memory.

32768K bytes of processor board System flash (Read/Write)


Configuration register is 0x2102


R1#

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
Richard Burts Wed, 03/07/2007 - 12:58
User Badges:
  • Super Silver, 17500 points or more
  • Hall of Fame,

    Founding Member

  • Cisco Designated VIP,

    2017 LAN, WAN

The squeeze operation writes to a log recording what it is doing. For some reason that log is not functioning on this router. I am pretty sure that if you erase flash (as the error message indicates) it will correct the problem and re-create the log.


HTH


Rick

Actions

This Discussion