2811 vwic-2mft-t1 for 2 remote sites

Unanswered Question

this is have a preliminary config on a cisco 2811 with one t1 wic on slot 0

and a vwic-2mft-t1 on slot 1.

i want to split slot 1 interface to

2 resite I a ordered 2 PPP circuits.

The one site on s0/0/0 we are installing an Avaya 350 gateway.

is the config for the vwic-2mft-t1 correct?

ersion 12.4

service timestamps debug datetime msec

service timestamps log datetime msec

no service password-encryption

!

hostname RTR-001

!

boot-start-marker

boot-end-marker

!

card type t1 0 1

no logging buffered

enable secret 5

!

no aaa new-model

!

resource policy

!

clock timezone PCTime -6

clock summer-time PCTime date Apr 6 2003 2:00 Oct 26 2003 2:00

no network-clock-participate wic 1

ip subnet-zero

!

!

ip cef

!

!

ip domain name domain.local

ip name-server 10.1.0.10

ip name-server 10.5.0.5

!

username XXX privilege 15 secret 5

!

controller T1 0/1/0

framing esf

linecode b8zs

channel-group 0 timeslots 24

!

controller T1 0/1/1

framing esf

linecode b8zs

channel-group 0 timeslots 24

!

class-map match-any AvayaControl

match ip dscp ef

class-map match-any AvayaVoice

match ip dscp ef

!

!

policy-map xxx-Avaya

class AvayaVoice

priority 280

class class-default

fair-queue

random-detect dscp-based

!

!

!

interface FastEthernet0/0

ip address 10.1.0.254 255.255.255.0

duplex auto

speed auto

!

interface FastEthernet0/1

ip address 10.5.0.46 255.255.255.0

duplex auto

speed auto

!

interface Serial0/0/0

description PPP to xxx

ip address 65.x.x.x.255.255.252

encapsulation ppp

!

interface Serial0/1/0:0

description PPP to xxx

ip address 65.x.x.1 255.255.255.252

encapsulation ppp

!

interface Serial0/1/1:0

description PPP to xxx

ip address 65.1.15.1 255.255.255.252

encapsulation ppp

!

router eigrp 100

network 10.0.0.0

no auto-summary

!

ip classless

ip route 10.1.11.254 255.255.255.255 Serial0/0/0 permanent

!

ip http server

!

!

control-plane

!

!

line con 0

line aux 0

line vty 0 4

privilege level 15

login local

transport input telnet

transport output none

!

scheduler allocate 20000 1000

!

end

Thanks for your help

I have this problem too.
0 votes
  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
jhimye Fri, 03/09/2007 - 13:15

In the controller config, unless you really want to use only timeslot 24, change it to

channel-group 0 timeslots 1-24

I've seen that mistake before.

HTH

Jhimye

Actions

This Discussion