flashsplash Thu, 03/08/2007 - 01:48

i don't really understand ur question but if it is that u want to manipulate the metric its possible. so please be more specific conserning ur question.

jain.nitin Thu, 03/08/2007 - 02:00

Hi You can manipulate the metric of RIP v2 with the help of Offset-List command. syntax is as below: You can increase the metric of a route

offset-list {access-list-number | name} {in| out} offset [type number]


If u need more clarification do let me know.


It it helps do rate this post.


Thanks

Ninja

gavin.mckee Thu, 03/08/2007 - 03:03

My question was related to applying offset lists to routes learned from a particular source.


Say my RIP routes are learned from two different devices:

172.22.152.129

and

192.168.50.60


So these are my routing information sources.


Can I apply an offet to increase the metric learned via the 192.168.50.60 router?


Thanks



Gavin

Jon Marshall Thu, 03/08/2007 - 03:09

Gavin


Yes, you can apply the offset list against an interface so you would apply it inbound on the interface that connects to the subnet that the 192.168.50.60 router is on.


HTH


Jon

Actions

This Discussion