ACE Module Configuration

CSCO10576352 · ‎03-08-2007

Hi, can anyone point me in the right direction for documentation on how to configure the new ACE module for the 6500. In particular how to configure an ACE context in router mode to load balance two servers.

Thanks in advance.

Syed Iftekhar Ahmed · ‎03-09-2007

"Application Networking" is the proper place to ask questions about Cisco's content networking products

You can start from a nice little example at

http://dataplumber.wordpress.com/2006/12/19/sample-config-the-new-cisco-ace-card-for-catalyst-6509/

For more details

http://www.cisco.com/en/US/products/hw/switches/ps708/products_configuration_guide_chapter09186a0080686ec5.html

hope it helps

Syed Iftekhar Ahmed

CSCO10576352 · ‎03-09-2007

Many thanks.

Rajat Chauhan · ‎03-09-2007

Hi,

For ACE documentation as per your software version:

http://www.cisco.com/univercd/cc/td/doc/product/lan/cat6000/mod_icn/ace/ace_301/index.htm

Many dont like the fact, but its true that to find documentation on service modules, we need to look under the switch/device platform rather than the technology supported.

Hope it helps.

Regards

Rajat Chauhan

CSCO10576352 · ‎03-09-2007

Thanks for the reply