cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
370
Views
0
Helpful
1
Replies

error "NAS duplicated authentication attempt

ahmedalshami
Level 1
Level 1

Dear

this error happened when the client try to connect

some clients coneccted then disconnected the other client couldnt connect please check the attached files

please advice wht is the main problem and how can i fix it

thanks in advanc

1 Accepted Solution

Accepted Solutions

Vivek Santuka
Cisco Employee
Cisco Employee

Hi,

This error happens due to client or accesspoint sending requests too fast. Try the following :-

1. Under System Configuration->Global Authentication enable "Fast Reconnect"

2. Under Global Authentication enable "AP EAP Timeout" and set the value to 20-30.

3. On the Client set the radius-server timeout to 15-30

This also happens due to a bug in MS Windows XP SP2. The bug can be found at :-

http://support.microsoft.com/kb/885453/en-us

Regards,

Vivek

View solution in original post

1 Reply 1

Vivek Santuka
Cisco Employee
Cisco Employee

Hi,

This error happens due to client or accesspoint sending requests too fast. Try the following :-

1. Under System Configuration->Global Authentication enable "Fast Reconnect"

2. Under Global Authentication enable "AP EAP Timeout" and set the value to 20-30.

3. On the Client set the radius-server timeout to 15-30

This also happens due to a bug in MS Windows XP SP2. The bug can be found at :-

http://support.microsoft.com/kb/885453/en-us

Regards,

Vivek

Review Cisco Networking products for a $25 gift card