03-08-2007 07:03 AM - edited 03-13-2019 03:59 PM
Hi there,
I need to integrate 2 CCM servers (CCM4.1(3) and CCM 3.3(5)) w/ 1 Unity 4.0.5.
CCM4.1(3) w/Unity4.0.5 done, works properly.
CCM 3.3(5) integration successfully. (I use Unity->manage integration-> ...
Call Manager cluster2->
verify server, successfully.)
Problem is,
that when I tried to add a phone to CCM 3.3(5) for testing,
this callmanager server rejects the phone's registration.
Is it doing with the configuration between two CallManager servers?
background:
Call Manager cluster1: CCM 4.1(3)
Call Manager cluster2: CCM 3.3(5) is new added server.
appreciate your reply.
03-08-2007 07:48 AM
Are you using auto-registration or manually adding the phones? If auto-registration, make sure that auto-registration is enabled for the server under System -> Callmanager in CCM admin.
Hope this helps.
Brandon
03-13-2007 09:35 PM
sorry for late reply.
I am not using auto-registration. already disabled.
Checked DHCP server. That causes the issue.
The IP phone receives IP addr. from CCM4.1(3)'s DHCP server--switch.Therefore,CCM3.3(5) rejects its registration.
Should I put CCM2 into another VLAN, and then doing InterVLAN on switch?
Or anybody got better idea? and how?
Thanks.
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: