03-08-2007 01:37 PM - edited 03-11-2019 02:43 AM
Hi.
I want to use pbr on a firewall.
I want to set up the following:
I have a proxy in an dmz configured in the firewall.
I want to rederect all http and https traffic through te firewall.
So how is it possible to let all outgoing www traffic go pass the proxy in the dmz.
Pbr is working with an normal router but not with the fwsm.
Any help is welkom
03-08-2007 06:37 PM
Hi Pal
U dont require a pbr to redirect all http & https traffic to proxy in DMZ. U create a nat 0 for all inside subnets and do a static nat for the proxy server with a public ip on the fwsm.
On the systems in inside zone configure the proxy settings with the proxy server ip in ur dmz.
On the router point a static route for the natted public ip towards the fwsm outside interface and remove all global command from fwsm.
03-08-2007 10:34 PM
Ok i know.
But what i want is to rederect all http and https traffic to the proxy in the dmz.
So even if a client settings uses no proxy or an another proxy i want to rederect the traffic.
Thats why i thought i have to use pbr.
Regards
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: