03-09-2007 07:15 AM - edited 03-15-2019 04:47 AM
Hi All
Just want to find out if i can use run CCME on the 3640 Platform.
Thanks in advance
03-09-2007 07:29 AM
Yes, you can run CME on 3640 Router. The support for CCME on 3640 is available till 3.2 release. Check the following for information about Supported Firmware, Platforms, Memory, and Voice Products for CME version (From 3.x onwards) http://www.cisco.com/univercd/cc/td/doc/product/access/ip_ph/ip_ks/itscdc/itsph.htm
03-09-2007 08:52 AM
Actually the most recent CME version supported on the 3640 should be 3.3, that is IOS 12.4(x) where x => 3, preferably 13a for the latest maintenance release.
03-09-2007 07:29 AM
Hey Tau,
You should be good to go with the 3640;
Supported Platforms and Memory Specifications
Cisco 3640, Cisco 3640A
From this good doc;
Cisco CallManager Express 3.2 Supported Firmware, Platforms, Memory, and Voice Products
http://www.cisco.com/en/US/products/sw/voicesw/ps4625/prod_installation_guide09186a00805201da.html
Hope this helps!
Rob
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide