Archiving Configs on RME 4.0.5 - Solaris

Unanswered Question
Mar 9th, 2007

When trying to verify my Directory it points to:/var/adm/CSCOpx/files/rme/dcma

Is that correct or Do I have to point it to:/var/adm/CSCOpx/files/rme/dcma/shadow.

Is there a Web Access to all my config files?

I have this problem too.
0 votes
  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
birengandhi Fri, 03/09/2007 - 08:45

Thanks there.

However when I dig into:


I only have 4 Devices in all being backedup.

What morecan I do, to resolve these?

Joe Clarke Fri, 03/09/2007 - 09:01

Enable ArchiveMgmt Service debugging under RME > Admin > System Preferences > Loglevel Settings, then run a config sync job against a device that does not have its config archived. The error you get in the job results plus the dcmaservice.log should give you an idea of why the archive is failing.

Joe Clarke Fri, 03/09/2007 - 10:46

You need to enable ArchiveMgmt Service debugging. This is found under the ArchiveMgmt application in Loglevel Settings. Once it is enabled, you can perform a Sync Archive operation for one failing device, then look at the job results and the dcmaservice.log for information as to why the config is not being archived.

birengandhi Tue, 03/13/2007 - 13:09

Hi there,

The following services, won't start on my Solaris server today, after I changed the IP address on the server today. Most I am concerned about is: ANIserver

1. DFMCTMStartup

2. EDS

3. DeviceDiscovery

4. FHPurgeTask

5. FDRewinder

6. ANIServer

7. UTMajorAcquisition



10. jrm

11. CTMJrmServer

12. ChangeAudit

13. SyslogAnalyzer

14. DataPurge

Is there a way, I could restart that service?

Joe Clarke Tue, 03/13/2007 - 13:12

When you change the IP address of the server, you need to do the following:

* Shutdown dmgtd, then delete all gatekeeper.ior files under NMSROOT

* Make sure that if you have modified NMSROOT/lib/vbroker/gatekeeper.cfg, that you change the IP address in this file to be the new IP address of the server

* Restart dmgtd

birengandhi Tue, 03/13/2007 - 13:22

I haven't modified gatekeeper.cfg, at all.

However, I just verified that both of files:

gatekeeper.cfg & gatekeeper.cfg.back has no IP addresses listed in it.

Pls. advise?!

Joe Clarke Tue, 03/13/2007 - 13:24

If the files have never been modified, then just delete the gatekeeper.ior files, and restart dmgtd.

birengandhi Tue, 03/13/2007 - 13:34

I just searched for gatekeeper.ior file, there is none under, vbroker.

ls -l

total 10

drwxr-x--- 2 casuser casusers 512 Feb 1 12:04 bin

-rw-r----- 1 casuser casusers 1891 Feb 2 11:07 gatekeeper.cfg

-rw-r----- 1 casuser casusers 1891 Feb 2 11:06 gatekeeper.cfg.back


Joe Clarke Tue, 03/13/2007 - 14:44

Gatekeeper.ior will be automatically regenerated when RmeGatekeeper restarts.

Joe Clarke Tue, 03/13/2007 - 14:43

Gatekeeper.ior will be found under /opt/CSCOpx/www/classpath and /opt/CSCOpx/campus/www/classpath.

Joe Clarke Wed, 03/14/2007 - 14:55

The engineer working on this SR will be in contact with you for remote access.


This Discussion