pix-internet-connectivity-configuration

Unanswered Question
Mar 11th, 2007
User Badges:

hi all,



i am trying to configure my internet connectivity my designe is :


ISA is connected to core switch (4003) having 1 interface. ip address is for the nic card is vlan ip address.


pix inside interfacce is in same vlan that is ISA port, so i can ping from pix to ISA and ISA to pix.


pix outside interface is configured in Layer-2 vlan i hv created seperate Layer-2 VLAN for this diag. and having internet pool ip address i.e. valid ip address


internet router faast ethernet is connected to my core and this port is also in layer 2 vlan same like pix outside interface. and ip address is from internet pool i.e. valid ip.


internet router serial is connected to my isp.


but still i am not able to surf from my vlan's.


please give me suggestions.


Thanks & Regards,

Ciscobuddy

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
ciscobuddy Sun, 03/11/2007 - 08:57
User Badges:

hi,


i have natted ISA ip on my pix ; static inside outside.






Thanks & regards,

Ciscobuddy

kaachary Sun, 03/11/2007 - 17:04
User Badges:
  • Cisco Employee,

You are not able to surf the vlan frm where ?


From Internet..or from inside ?


Please clarify.


-Kanishka

Anand Narayana Mon, 03/12/2007 - 07:47
User Badges:
  • Silver, 250 points or more

Hi Buddy,

make sure that you had given a default route the internet "route outside 0.0.0.0 0.0.0.0 x.x.x.x"


Note: Where "outside" is the interface which is pointing towards the internet.

Actions

This Discussion