cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
429
Views
0
Helpful
3
Replies

pix-internet-connectivity-configuration

ciscobuddy
Level 1
Level 1

hi all,

i am trying to configure my internet connectivity my designe is :

ISA is connected to core switch (4003) having 1 interface. ip address is for the nic card is vlan ip address.

pix inside interfacce is in same vlan that is ISA port, so i can ping from pix to ISA and ISA to pix.

pix outside interface is configured in Layer-2 vlan i hv created seperate Layer-2 VLAN for this diag. and having internet pool ip address i.e. valid ip address

internet router faast ethernet is connected to my core and this port is also in layer 2 vlan same like pix outside interface. and ip address is from internet pool i.e. valid ip.

internet router serial is connected to my isp.

but still i am not able to surf from my vlan's.

please give me suggestions.

Thanks & Regards,

Ciscobuddy

3 Replies 3

ciscobuddy
Level 1
Level 1

hi,

i have natted ISA ip on my pix ; static inside outside.

Thanks & regards,

Ciscobuddy

kaachary
Cisco Employee
Cisco Employee

You are not able to surf the vlan frm where ?

From Internet..or from inside ?

Please clarify.

-Kanishka

Hi Buddy,

make sure that you had given a default route the internet "route outside 0.0.0.0 0.0.0.0 x.x.x.x"

Note: Where "outside" is the interface which is pointing towards the internet.

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: