cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
436
Views
0
Helpful
3
Replies

pix-internet-connectivity-configuration

ciscobuddy
Level 1
Level 1

hi all,

i am trying to configure my internet connectivity my designe is :

ISA is connected to core switch (4003) having 1 interface. ip address is for the nic card is vlan ip address.

pix inside interfacce is in same vlan that is ISA port, so i can ping from pix to ISA and ISA to pix.

pix outside interface is configured in Layer-2 vlan i hv created seperate Layer-2 VLAN for this diag. and having internet pool ip address i.e. valid ip address

internet router faast ethernet is connected to my core and this port is also in layer 2 vlan same like pix outside interface. and ip address is from internet pool i.e. valid ip.

internet router serial is connected to my isp.

but still i am not able to surf from my vlan's.

please give me suggestions.

Thanks & Regards,

Ciscobuddy

3 Replies 3

ciscobuddy
Level 1
Level 1

hi,

i have natted ISA ip on my pix ; static inside outside.

Thanks & regards,

Ciscobuddy

kaachary
Cisco Employee
Cisco Employee

You are not able to surf the vlan frm where ?

From Internet..or from inside ?

Please clarify.

-Kanishka

Hi Buddy,

make sure that you had given a default route the internet "route outside 0.0.0.0 0.0.0.0 x.x.x.x"

Note: Where "outside" is the interface which is pointing towards the internet.