cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
769
Views
0
Helpful
2
Replies

route-maps on 3750

Richard Venn
Level 1
Level 1

Hello,

I am using route-maps on a 3750 to forward traffic to a specific next-hop. I would like to use "set ip next-hop recursive a.b.c.d" as the next hop is not a local network.

However the feature navigator shows this as unsupported command on 3750's.

Can anyone confirm this as I am unable to try this command as the switch is in a live network?

Cheers

Richard

1 Accepted Solution

Accepted Solutions

spremkumar
Level 9
Level 9

Hi Richard

I feel if its mentioned not supported in Feature Navigator i dont think you will be able to go with that command..

But did you try checking up the command reference guide of the ios installed in your box..

http://www.cisco.com/en/US/products/hw/switches/ps5023/prod_command_reference_list.html

regds

View solution in original post

2 Replies 2

spremkumar
Level 9
Level 9

Hi Richard

I feel if its mentioned not supported in Feature Navigator i dont think you will be able to go with that command..

But did you try checking up the command reference guide of the ios installed in your box..

http://www.cisco.com/en/US/products/hw/switches/ps5023/prod_command_reference_list.html

regds

Hello,

Many thanks for the guide. I had got round to checking and its not there.

Cheers

Richard

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: