cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
874
Views
0
Helpful
6
Replies

2851 router in rommon

hi

my router is in rommon mode how can i get back to normal operation its not taking the confreg 0x2102 also

i think the image is got corrupted

how can i upload new image.

ur suggestion will be highly appreciated

regards

6 Replies 6

Danilo Dy
VIP Alumni
VIP Alumni

Try the following command in ROMMON

rommon 1 > confreg 0x2102

rommon 2 > reset

If it still boot in ROMMON, try this link http://www.cisco.com/en/US/products/hw/routers/ps259/products_tech_note09186a0080094a0b.shtml

If the first link doesn't fix the problem, try this link

http://www.cisco.com/en/US/products/hw/routers/ps259/products_tech_note09186a008015bfac.shtml

when i do

dir flash

the router is showing an error

open error=-66

dir:cannot open device flash

I think this error message displays when the flash is empty or the file system is corrupted. Try the second link I provided to you to upload IOS using XMODEM

http://www.cisco.com/en/US/products/hw/routers/ps259/products_tech_note09186a008015bfac.shtml

hi

thanks for ur speedy reply but still m getting the same error.

Contact your vendor then, the flash maybe faulty. The error -66 looks like hardware, can't find it in Cisco web

i think this is the matter as i used one router flash this is working not giving this error.

i m trying with other router flash which is 32mb only mine was 64 but the ios will come in this as its only 28mb.

i will make this router running and when will get new flash will replace well thanks for your reply .

i will assaign points whn router is up and running.

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community:

Innovations in Cisco Full Stack Observability - A new webinar from Cisco