Hep with Creating VLANS on my CAT 2948G-L3 Switch

Unanswered Question
Mar 12th, 2007
User Badges:

I'm trying to create VLANS on this switch but I don't see the commands to do it. I have the following IOS instlaled.


Thanks in advance for the help


  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 3 (1 ratings)
MICHAEL CICCONE Mon, 03/12/2007 - 10:55
User Badges:


Here is what I would like to do with this switch. I want to have seprate networks. Say and I was planning on doing this with two different vlans. Vlan 10 and 11. Then have the two vlans route to the router. I need to the vlans so that I can have x number of ports for the one network and y number of ports for the other network. How can I achive this?


Amit Singh Mon, 03/12/2007 - 11:04
User Badges:
  • Cisco Employee,

Do you have a spare L2 switch. You cannot create L2 vlans on this box. You can use it as an external L3 router for intervlan routing between the vlans. Use a spare L2 switch and uplink it to this box using a trunk link and then create sub-interfaces for the respective vlans for achieving the inter-vlan routing.

-amit singh

MICHAEL CICCONE Mon, 03/12/2007 - 11:20
User Badges:


Thanks for the help... Sounds like what your telling me is that I cannot use this switches the way I would like to. I guess I need a 3550 or 3750.



This Discussion