Trouble with BR1410 accepting clients

Unanswered Question
Mar 12th, 2007
User Badges:

Hello all, I am having trouble configuring a 1410 bridge to accept clients. I am running SW 12.3(7)JA3. I set the bridge to Root mode and assign basic settings but cannot connect with a client. I can see the SSID broadcasting. Any ideas?

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
umedryk Fri, 03/16/2007 - 11:53
User Badges:
  • Bronze, 100 points or more

Check if client sees the SSID of the bridge.If not adjust the channel number on the bridge. If SSID is broadcast check for the authentication type.Is it configured same on the bridge and the clients.Refer URL for configuring the bridge

http://www.cisco.com/en/US/products/hw/wireless/ps430/products_configuration_guide_chapter09186a0080606d4a.html#wp1101651

mmurders Fri, 03/16/2007 - 11:58
User Badges:

Unfortunately, I have been informed by Cisco that the 1410 will NOT accept any clients. It only uses the UNII 3 band and is not capable of taking clients. Explains why I could see the broadcasted SSID, but not connect. Thanks for the reply.

Actions

This Discussion

 

 

Trending Topics: Other Wireless Mobility

client could not be authenticated
Network Analysis Module (NAM) Products
Cisco 6500 nam
reason 440 driver failure
Cisco password cracker
Cisco Wireless mode