Registering MCU via SCCP

Unanswered Question
Mar 12th, 2007
User Badges:

I have an IPVC-3515 which we use with H.323 gatekeeper. This has been working fine. I also see that I can use SCCP with this unit. Does anyone have any docs that explain how to do this? I am using CM4.0. What phone load would it try to tftp from CM and what type of phone would it try to register as?


Thx

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
Brandon Buffin Mon, 03/12/2007 - 16:34
User Badges:
  • Purple, 4500 points or more

You would add it to CCM as a video conference bridge. The CCM configuration can be found here:


http://www.cisco.com/en/US/products/sw/voicesw/ps556/products_administration_guide_chapter09186a00801ecf8a.html#1057743


The IPVC configuration can be found here:


http://www.cisco.com/en/US/docs/voice_ip_comm/cuvcm/release_5_1/3515/administration/guide/Protocols.html#wp2915457


Hope this helps. If so, please rate the post.


Brandon

Actions

This Discussion