VOIP configuration over mpls link

manish.gaur · ‎03-13-2007

Hi

we want to deploy voip for multiple location over the mpls lines we have between the multiple location can any body suggest the feasibility and how to do it and any related document and guidance for that

Thanks

Manish gaur

mheusinger · ‎03-13-2007

Hi,

what do you call a "mpls link"? Do you have an IP interface connecting to a MPLS network implemented by a provider or do you operate a MPLS network yourself?

In any case you might have a look at

1) Enterprise QoS Solution Reference Network Design Guide Version 3.3

http://www.cisco.com/application/pdf/en/us/guest/netsol/ns432/c649/ccmigration_09186a008049b062.pdf

2) Layer 3 MPLS VPN Enterprise Consumer Guide Version 2

http://www.cisco.com/application/pdf/en/us/guest/netsol/ns171/c649/ccmigration_09186a008077b19b.pdf

3) Various design guides for Unified communications

http://www.cisco.com/en/US/netsol/ns656/networking_solutions_design_guidances_list.html#anchor10

Hope this helps!

Regards, Martin

alaertevidale · ‎03-14-2007

Will VOIP compete with data traffic?

mheusinger · ‎03-14-2007

Yes of course, if you route it over the same links. This is why I pointed you to the design guides, which will tell you how to prioritize voip over data to avoid quality issues.

Regards, Martin

manish.gaur · ‎03-15-2007

hi mheusinger

Thanks for Your comments actually in our scenrio we are integerating our local PBX system with MPls router using E-1 between router(MPLS) and PBX and the vo-ip and pots configured on the same router and i am looking for this feasibility wether we can use the same interfaces to configure the pots and voip which are configured with the mpls connectivity.

Thanks

Manish gaur

manish.gaur · ‎03-15-2007

hi

IS their any feasibilty to create voip on the MPLS interfaces.

or i ahve to go for the scenerio liek back to back connectivity between the mpls router and another new router with serial termination and than E1 witht he PBX with new router.

Kindly suggest me or ic an create voip on the same interfaces on which the mpls is coming

Thanks & Regards

Manish Gaur