Cisco Catalyst 6504 : Radius Module not initialized

sebastianvandijk · ‎03-13-2007

I am trying to get Radius work on our cisco machines. However when i debug i get this message "Radius Module not initialized".

What am i missing, a piece of the config is entered below :

aaa new-model

aaa group server radius TEST-Radius

server 192.168.140.15 auth-port 1645 acct-port 1646

!

aaa authentication banner ^CC This is the Authentication Banner ^C

aaa authentication fail-message ^CC This is the Authentication Fail Message ^C

aaa authentication password-prompt "Please enter your TEST password"

aaa authentication login TEST-Auth group TEST-Radius local

aaa authorization exec TEST-Auth group TEST-Radius if-authenticated

aaa authorization command 15 TEST-Auth group TEST-Radius if-authenticated

radius-server source-ports 1645-1646

radius-server key PASSWORD

line vty 0 4

password telnetpassword

login authentication TEST-Auth

What am i missing or what can i debug to solve this ?

Regards

Sebastian

Report Inappropriate Content · ‎03-19-2007

configuring radius with aaa, without a radius server configuration could cause the issue.I find radius-server host x.x.x.x auth-port cccc acct-port cccc, radius-server host x.x.x.x auth-port cccc acct-port cccc

sebastianvandijk · ‎03-20-2007

It seems to work, i'll test it further on.

However i don't understand because i thought the configuration like below was enough..

aaa group server radius TEST-Radius

server 192.168.140.15 auth-port 1645 acct-port 1646

chandruenn · ‎04-05-2007

Hi All,

Is this problem got resolved for u.

I am facing the exactly the same problem.

"Radius Module not initialized.

Thanks in Advance.