WS-X4515

Answered Question
Mar 13th, 2007

the WS-X4515 supports 2 GE ports.

can they be used at the same time, to get redundant links?

I have this problem too.
0 votes
Correct Answer by Amit Singh about 9 years 8 months ago

yes, you need to install the GBIC converter on these ports. You have to choose out from WS-5483, WS-5484,WS-5486 GBICs.

http://www.cisco.com/en/US/products/hw/modules/ps5455/products_data_sheet09186a008014cb5e.html

HTH,please rate if it does.

-amit singh

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 5 (1 ratings)
Loading.
Amit Singh Tue, 03/13/2007 - 07:59

Yes, you can use both the GE ports simultaneously if you are using in a single supervisor config on a chassis. If you are using the Sup engine in a redundant sup engine config on 4507R, only the first port of each sup engine is active. the second port of each sup engine is inactive/standby mode.

HTH,please rate if it does.

-amit singh

Actions

This Discussion