cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
362
Views
0
Helpful
4
Replies

router c1700 serie in rommon mode

tontonkab
Level 1
Level 1

I think the flash is corrupted any refuse confreg 0x2102 or 0x2142....

need help.

thanks

4 Replies 4

Amit Singh
Cisco Employee
Cisco Employee

What happens when you try to access flash using " dir flash:"

Do you access it and see any file in there?

-amit singh

I do but show me that there is a file name like startup-configt instead of c1700-mz...bin

nothing in all confreg setting

Hi

can you try giving boot command under the rommon prompt.

Once you are done it should boot normally and get you to the router prompt.

Once you are there in the router prompt you can check out for the confreg and change the same..

regds

Amit Singh
Cisco Employee
Cisco Employee

I believe you dont have the required image in the flash, that's why the router is in rommon prompt.Please use the document below for recovering the router from rommon :

http://www.cisco.com/en/US/products/hw/routers/ps221/products_configuration_guide_chapter09186a008007cd0e.html

HTH,Please rate if it does.

-amit singh

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community:

Innovations in Cisco Full Stack Observability - A new webinar from Cisco