WCCP Support for other TCP Ports

Unanswered Question
Mar 15th, 2007

Looking for a sample config using WCCP to redirect TCP port 8080 and 8443 as well some other custom TCP ports.

Currently using the CEs/WAEs for HTTP and other standard streaming protocols.

Using ACNS 5.X. Not clear on the service group config.


ip wccp web-cache redirect-list 123

ip wccp 60 redirect-list 123

ip wccp 70 redirect-list 123

ip wccp 80 redirect-list 123

ip wccp 81 redirect-list 123

ip wccp 82 redirect-list 123

interface xxxx

ip wccp web-cache redirect out

ip wccp 60 redirect out

ip wccp 70 redirect out

ip wccp 80 redirect out

ip wccp 81 redirect out

ip wccp 82 redirect out



I have this problem too.
0 votes
  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
alejrodr Thu, 03/15/2007 - 08:55


Please take a look at this doc, will help you with the redirection of 8080 and 8443.


For the other services, it is pretty much as you have them on the router.


You will need to enable them on the CE as well.


Something like this for WMT and RTSP:


ip wccp web-cache

ip wccp 80

ip wccp 81

ip wccp 82

ip wccp 83

interface FastEthernet0/1

description to WAN

ip address xxxxxxx

ip wccp web-cache redirect out

ip wccp 80 redirect out

ip wccp 81 redirect out

ip wccp 82 redirect out

ip wccp 83 redirect out


wccp router-list 1

wccp web-cache router-list-num 1

wccp rtsp router-list-num 1

wccp wmt router-list-num 1

wccp version 2

Hope it helps.


jtorjman Thu, 03/15/2007 - 09:37

Are the actual TCP Ports (non standard) configured on the CDM GUI? The CE then tells the wccp router to look for that TCP port based on the service number.

(We have some web apps on TCP 2000 and 3000.)




This Discussion