CMM voice traffic issue

Unanswered Question
Mar 15th, 2007
User Badges:

Hi everybody,

I configured a CMM module (WS-SVC-CMM-ACT) with CCM ver 4.1.3 as a conference bridge and transcoder, both are properly registered in the CCM.

When I try to make a conference, or to use the trancoder resources, the connection is established but there is not RTP voice traffic. I know that there is not routing problems.

When I type the "show sccp connnections" on the CMM, it shows the connections of the IP phones on the conference.

Any suggestions?

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading. Thu, 08/02/2007 - 06:41
User Badges:

I have the same problem. Were you able to resolve? If yes, I'd like to know so I can resolve my problem. Thanks in advance!!!

alfonsojaimes Fri, 08/03/2007 - 11:42
User Badges:

Yes, I was able to solve the problem.

I didn?t realize that the fastethernet interface of the CMM was not in the same vlan as the gigabitethernet interface.

Please let me know if you could solve it.

animeshpatel Mon, 05/04/2009 - 12:23
User Badges:

I have the same problem, and my Fast Ethernet Int & Gig Int are in the same VLAN but still no RTP voice stream.

Please let me know if there is a different solution


This Discussion