pradeepde Wed, 03/21/2007 - 12:24
User Badges:
  • Bronze, 100 points or more

The FWSM can track packet information for traffic that passes through the general-purpose processor, including management traffic and inspection engines. The FWSM cannot capture traffic that goes through the network processors (such as most through traffic).

Try this link:

http://www.cisco.com/en/US/products/hw/modules/ps2706/products_qanda_item09186a00801e9e26.shtml

s-andersson Mon, 04/16/2007 - 05:08
User Badges:

Hi


What version of the fwsm are you running. The capture command works in 3.x version and later...


Best regards


Stefan (sweden)

Actions

This Discussion