paolo bevilacqua Fri, 03/16/2007 - 14:26
User Badges:
  • Super Gold, 25000 points or more
  • Hall of Fame,

    Founding Member

Yes it does, NM-1T3/E3. The next bigger router is the 7200.

Hope this helps, if so please rate post!

sundar.palaniappan Fri, 03/16/2007 - 14:27
User Badges:
  • Green, 3000 points or more

3800 Series routers sure does support DS3 cards. Look under table 3 in the link below.

Use Cisco Feature Navigator tool on CCO and select the 'search by platform' option and to configure the hardware. Here's the link..



abbas.ali Fri, 03/16/2007 - 15:29
User Badges:

Eventhough 3824 supports T3, but what does it refer to in a model comparison chart that 3824 only supports 1/2 T3 (Services at Line Rate) while 3845 supports T3 (Services at line rate.


This Discussion