combine two partitions into 1

Unanswered Question
Mar 17th, 2007

How to combine two partions into 1 partion?

Thanks!

Samuel

=========================================

Cat2#sh flash

System flash directory, partition 1:

File Length Name/status

1 2608404 c4500-i-mz.112-17.P

[2608468 bytes used, 1585836 available, 4194304 total]

4096K bytes of processor board System flash (Read/Write)

System flash directory, partition 2:

File Length Name/status

1 3146895 c4500-boot-m.103-7

[3146960 bytes used, 1047344 available, 4194304 total]

4096K bytes of processor board System flash (Read/Write)

Cat2#

========================================

Cat2#sh ver

Cisco Internetwork Operating System Software

IOS (tm) 4500 Software (C4500-J-M), Version 11.1(13), RELEASE SOFTWARE (fc1)

Copyright (c) 1986-1997 by cisco Systems, Inc.

Compiled Tue 15-Jul-97 15:40 by tlane

Image text-base: 0x600088A0, data-base: 0x6071A000

ROM: System Bootstrap, Version 5.2(7b) [mkamson 7b], RELEASE SOFTWARE (fc1)

Cat2 uptime is 10 hours, 0 minutes

System restarted by power-on

Running default software

cisco 4500 (R4K) processor (revision B) with 32768K/16384K bytes of memory.

Processor board ID 01834253

R4600 processor, Implementation 32, Revision 2.0

G.703/E1 software, Version 1.0.

Bridging software.

SuperLAT software copyright 1990 by Meridian Technology Corp).

X.25 software, Version 2.0, NET2, BFE and GOSIP compliant.

TN3270 Emulation software (copyright 1994 by TGV Inc).

1 FastEthernet/IEEE 802.3 interface.

4 Serial network interfaces.

128K bytes of non-volatile configuration memory.

4096K bytes of processor board System flash partition 1 (Read/Write)

4096K bytes of processor board System flash partition 2 (Read/Write)

Configuration register is 0x2102

Cat2#

=========================================

I have this problem too.
0 votes
  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.

Actions

This Discussion