03-18-2007 11:54 PM - edited 03-05-2019 02:58 PM
While trying to upgrade IOS for Cisco 6513 with SUP 720 IOS ver 12.2(17d)SXB11 to 12.2(18) the IOS upgrade got failed and now I am getting rommon menu. The Switch is not booting and i am getting follwoing error
open(): Open Error = -9
loadprog: error - on file open
boot: cannot load "bootflash 72033-pk9s-mz.122-17d.SXB11.bin"
System Bo otstrap, Version 8.1(3)
Copyright 19 94-20 04 by cisco Systems, Inc.
Cat6k-Sup720/SP processor with 524288 Kbytes of main memory
rommon 1 >
As I don't have any flash memory to boot the switch from drive 0. Is there any way to recover the deleted IOS or to reinstall. Please let me know
03-19-2007 12:01 AM
Hi
Hope this helps..
http://www.cisco.com/en/US/products/hw/switches/ps700/products_tech_note09186a008015bfa1.shtml
regds
03-19-2007 12:24 AM
Hi spremkumar
Thanks a lot for your immediate reply the problem with me is I am having Cisco 6500 Series Switch with Supervisor Engine 720 which does not support xmodem tranfer. I did tried xmodem it failed. Need to find other solution. I have one more switch running fine can I install this supervisor engine in the exsisting switch and recover the IOS
cheers
Yasir
03-19-2007 12:27 AM
Hi Yasir
You can do that we did try the same kinda swap in some of our Cisco 7606 boxes quite some time back..
regds
03-19-2007 02:07 AM
Hi Prem
I tried every thing I did tried from the above link. No luck i think i need to order flash memory for the supervisor engine
regards,
Yasir
03-19-2007 02:23 AM
Hi
Yasir
Can u try this link.
Thanks
Mahmood
03-19-2007 03:44 AM
Hi
Mahmood
I did tried the above link, the first thing I did search cisco web site and later on when I found no solutions then I posted the question here.
Thanks
Yasir
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide