4948 Configuring etherchannel

network_team · ‎03-19-2007

I am looking into the possibilty of stacking 4948 switch via connecting by etherchanneling. Does anyone know how i would config etherchannel.

Amit Singh · ‎03-19-2007

Please use the link below for configuring ether-channel on 4948 switches.

http://www.cisco.com/univercd/cc/td/doc/product/lan/cat4000/12_2_31s/conf/channel.htm

HTH,Please rate if it does.

-amit singh

glen.grant · ‎03-19-2007

On your connecting links add the following "channel group 1 mode desirable non-silent" . If you need trunks also that is additional configs , search on cisco.com for trunking and etherchannel .