Wich module for ISDN phone

Unanswered Question
Mar 19th, 2007

I need to connect a ISDN phone to my 2800 series router, running call manager express. Can some one please point me in the direction of which card will allow me to make outgoing and accept incoming calls.

I have this problem too.
0 votes
  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 4 (1 ratings)
Loading.
Paolo Bevilacqua Mon, 03/19/2007 - 05:21

Hi Martin,

You need VIC2-2BRI-NT/TE. Nothing else will work in the 2800. Cable must be crossed (BRI cable, not ethernet).

Hope this helps, if so please rate post!

martinbuffleo Mon, 03/19/2007 - 05:44

Thanks.

Thats good I have a VIC2-2BRI-NT/TE. Could you possibly advise on basic configuration.

Currently the LEDs on the card are off and I can't seem to get them on. The router is detected the module, during bootup. Card is HWIC 0 and I have two PVDM 32 modules installed.

Planned configuration is.

ISDN phone --- cisco 2811 --- IP conection ----cisco 2811 -- BRI.

If you can help me get the phone working that would be great.

Actions

This Discussion