Having issues after PIX 7.2 upgrade from 6.3
I have an outbound (secure to less secure) destination static NAT in place, which works fine, but because of this NAT, I can no longer route through using real-IP destination address.
static (outside,inside) 10.1.1.1 192.168.1.1 netmask 255.255.255.255
accesss-list no-nat permit ip 172.16.1.0 255.255.255.0 any
nat (inside) 0 access-list no-nat
so if I'm sourcing from 172.16.1.0 destin for 10.1.1.1, it works fine, NATting destination to 192.168.1.1
but if I'm sourcing from 172.16.1.0 destin for real IP 192.168.1.1, this no longer works.