Hi,
I want to get some priority queueing rolling on my router. I already have some in place that works fine, but I want to throw packets with a port destination of 5060 (sip) to the top of the heap. Here is what I have so far:
interface Serial1/0
ip address x.x.x.x 255.255.255.252
serial restart-delay 0
priority-group 1
interface FastEthernet2/0
ip address 192.168.50.2 255.255.255.0
duplex auto
speed auto
access-list 105 permit tcp any any eq 5060
access-list 105 permit udp any any eq 5060
access-list 105 permit udp any any range 16384 16484
priority-list 1 protocol ip high list 105
It seems to me when I do some debugging that it is only matching outbound packets to the access-lists. This would be fine, but all of the sip traffic is leaving from a tunnel interface, which doesn't have the "priority-group" command available. Is there any way to have pq throw packets to high priority when they enter the router?
thanks!