Hi,

I want to get some priority queueing rolling on my router. I already have some in place that works fine, but I want to throw packets with a port destination of 5060 (sip) to the top of the heap. Here is what I have so far:

interface Serial1/0

ip address x.x.x.x 255.255.255.252

serial restart-delay 0

priority-group 1

interface FastEthernet2/0

ip address 192.168.50.2 255.255.255.0

duplex auto

speed auto

access-list 105 permit tcp any any eq 5060

access-list 105 permit udp any any eq 5060

access-list 105 permit udp any any range 16384 16484

priority-list 1 protocol ip high list 105

It seems to me when I do some debugging that it is only matching outbound packets to the access-lists. This would be fine, but all of the sip traffic is leaving from a tunnel interface, which doesn't have the "priority-group" command available. Is there any way to have pq throw packets to high priority when they enter the router?

thanks!