03-19-2007 03:38 PM - edited 03-14-2019 08:33 PM
Every few days the vic-2fxo card in my 1751v router seems to stop working properly. It does not answer calls coming in but appears to try and place outbound calls. Only it doesn't seem to pickup the line. i.e. no dialtone, ringing tone etc. but the system seems to think the call is going through.
A show voice port summary shows the port is off-hook and operational status as up but it's not placing the call.
Any ideas? Any suggestions on debugging this some more? I'm sure it a faulty fxo but it's strange thatit only happens every few days.
03-19-2007 04:01 PM
Hi,
can be a stuck call. Status should be dorm, on-hook.
Can you check IOS and upgrade ?
The alternative is configure disconnection supervision (not always an easy task).
03-19-2007 04:06 PM
status was dorm, on-hook
However I tried shutdown on voice port and then no shutdown to bring it back up but now show voice port summary shows that status os dorm and on-hook but operational status is down. How do I bring operational status back up?
IOS is 12.4(11)T1
03-19-2007 04:11 PM
Sorry, if shut/no shut fails to bring back the port to life, I'm afraid the only alternative is a reboot.
IOS is fine.
Guide to disconnect troubleshooting:
http://www.cisco.com/en/US/customer/tech/tk652/tk653/technologies_tech_note09186a00800ae2d1.shtml
Hope this helps, if so please rate post!
03-19-2007 04:40 PM
Thanks for you help
but that link is about disconnect problems - which isn't my issue. The ports work fine for a couple of days and then seem to fail for no reason. I'd like to find a way to debug so I can identify problem.
03-19-2007 04:53 PM
Indeed, if you call from outside and hear ringback rather than busy, the port is not stuck off-hook. The debug command to see what the port is doing is "debug vpm signal".
03-19-2007 06:00 PM
Is the FXO signaling configured as Loop or Ground Start?
Armando
03-20-2007 01:05 AM
both are configured as loop-start.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide