03-19-2007 07:39 PM - edited 02-21-2020 02:56 PM
Hi All,
I configured the VPN between H.O and B.O Cisco ISR router and VPN has come at both end and the tunnel is showing is UP-ACTIVE.
But when I ping the server at B.O, which has been nat`ed at B.O vpn router, the ping is giving request timeout at H.O.
But when I ping the B.O server from B.O router the ping is OK.
The B.O server segment is in another segment which has been NAT`ed at B.O router.
The debbug show what NAT is working properlly and the show ACL couter increases for VPN traffic also, but the ping traffic is always request timeout.
What cab be the problem?
03-19-2007 11:57 PM
Hi
Do throw more light on the kinda network topology you have in place out there and the addressing scheme..
if possible do post out a sample network diagram for the same..
regds
03-20-2007 12:31 AM
03-20-2007 07:14 AM
Hi,
Is the B.O`s route-map and static NAT config correct?
03-20-2007 07:23 AM
The NAT config looks good. Make sure you have a static route on the switch for L.M.N.0 and P.Q.0.0 subnet pointing to the Router's ip address.
-Kanishka
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide