thisisshanky Mon, 03/19/2007 - 22:37
User Badges:
  • Purple, 4500 points or more

Cristian,


http://www.cisco.com/univercd/cc/td/doc/product/voice/srst/srst40/srs40spc.htm


SRST 4.0 does support 7941 but doesnt say anything about 7911. IOS versions that support SRST 4.0 are given below in this link.


http://www.cisco.com/univercd/cc/td/doc/product/voice/srst/srst40/srst40ad/srs_map.htm


HTH


Sankar


PS: please remember to rate posts!

cristian.munoz Fri, 03/23/2007 - 10:04
User Badges:

Hi Sankar


I upgraded the IOS and the IP Phone are registered, but for outgoing calls not works. I made a call using CSIM command and the call works. The router are connect to PSTN by E1 PRI.Pls. see the SRST config:


call-manager-fallback

max-conferences 8 gain -6

transfer-system full-consult

ip source-address port 2000

max-ephones 96

max-dn 120

access-code pri 9 direct-inward-dial

time-zone 11

date-format dd-mm-yy


This is the dial-peer for outgoing calls:


dial-peer voice 100 pots

destination-pattern 9

direct-inward-dial

port 0/0/0:15


Actions

This Discussion