cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
403
Views
0
Helpful
2
Replies

All systems can see each other except PIX can't see one server

professorguy
Level 1
Level 1

I have a PIX (to the internet) and 2 servers connected to a router.

From the router, I can ping both servers and the PIX without a problem.

From each server, I can ping the other, the router, and the PIX.

From the PIX, I can ping the router but ONLY ONE of the servers.

Here is a 'show route' from the PIX:

outside 0.0.0.0 0.0.0.0 <ISP_ROUTER> 1 OTHER static

inside 192.168.0.0 255.255.0.0 <OUR_ROUTER> 1 OTHER static

inside <PUBLIC_IP1> 255.255.255.255 192.168.77.77 1 OTHER static

inside <PUBLIC_IP2> 255.255.255.255 192.168.77.77 1 OTHER static

The servers are 192.168.77.77 & 192.168.77.88. I can get to ...77 but not ...88. However, lines 3 & 4 above have to do with public access to Server1, nothing to do with getting from the PIX command line to ...77 so I don't see the problem here.

Any ideas?

2 Replies 2

What's the IP address/subnet mask of the PIX inside interface and the router interface that connects to the PIX?

PIX:

ip address inside 192.168.66.2 255.255.255.0

ROUTER:

interface GigabitEthernet1/0/1

description INTERNET FIREWALL

no switchport

ip address 192.168.66.1 255.255.255.0

no mdix auto

!

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: