password recovery on 2600 doesn't work

Answered Question
Mar 20th, 2007
User Badges:

Hi,



I'm trying to recover forgotten password on the 2600 router. I have been doing exactly as it written in the document however no luck.


this what i do


reboot into rommon > confreg 0X2142

reset

no on the promt

enable

copy startup-config running config

show running config

i have the folowwing at the end of the file

line con 0

exec-timeout 0 0

password xxx

login

transport input none

line aux 0

line vty 0 4

password xxx

login


conf t

enable secret test

no shutdown on each interface

config-register 0x2102

after restart i can't get into router


Please let me know what I'm doing wrong



thank you for your help

Correct Answer by sundar.palaniappan about 10 years 1 week ago

You changed the enable password but did not change the console password.


Perform password recovery again and set the line console password as follows.


line con 0

pass


HTH


Sundar



  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 5 (2 ratings)
Loading.
Correct Answer
sundar.palaniappan Tue, 03/20/2007 - 12:30
User Badges:
  • Green, 3000 points or more

You changed the enable password but did not change the console password.


Perform password recovery again and set the line console password as follows.


line con 0

pass


HTH


Sundar



Actions

This Discussion